The al-8 Compact Line Array System picks up where the al-4 Subcompact Line Array System leaves off. The al-8 ‘Acoustic Linearity’ element utilizes VUE’s most advanced technologies including CST™ to extract exceptional performance from its compact design. Innovative technologies such as beryllium compression drivers, Kevlar/Neo transducers, precision amplification and DSP, and onboard SystemVUE networking allow the highly scalable al-8 to deliver unprecedented performance to a broad range of mid-sized sound reinforcement applications.
FEATURES:
- Each al-8 Compact Line Array System “block” includes
four al-8 Acoustic Elements and a single VUEDrive™ V6 Systems Engine - Scalable by adding or removing other al-Class acoustic elements,
or combining multiple al-8 blocks - Onboard SystemVUE™ networking
- Integrated flying hardware allows quick assembly of arrays of up to 16 elements per flybar
- Optional flying and transport accessories available
- The al-8 can be used as elements in complex CST™ Hybrid Array along with al-12’s and al-4’s
The al-8 Line Array System is made up of the al-8 Acoustic Element and rack-mount VUEDrive™ V6 Systems Engine. The V6 combines a highly sophisticated DSP architecture with enough amplifier power to tri-amp up to four al-8 acoustic elements. In addition, onboard SystemVUE networking capabilities allow easy assembly of sophisticated networks with remote management and control available via the intuitive SystemVUE™ control software.
The system is sold in standard blocks, with four al-8 Acoustic Elements and a single V6 Systems Engine comprising a single block. Multiple al-8 blocks can be combined to address larger applications.
For applications where extended low-frequency is required, the al-8 can be used with the al-8SB integrated flyable subwoofer and is fully compatibility with a variety of other VUE subwoofers. Flexible options allow flying, or ground stacking. All al-Class elements are DANTE Enabled.
Easy Assembly and Instant Results
The al-8 Line Array System benefits from a highly sophisticated DSP architecture that allows each individual component-from transducers, amplifiers and cabinets, all the way out to the SystemVUE software itself–to work in perfect harmony for precise control and easy operation. In fact, the technology is so smart, that al-8 designers were able to pre-load the V6 Systems Engine with a library presets that dramatically improve ‘out -of-the-box’ performance while streamlining setup. Operators simply assemble the array, select the desired preset from the SystemVUE software, then align the physical placement. Minimal EQ or tweaking is required and the operator is free to concentrate on creating the perfect mix.
Truextent® Beryllium
The al-Class line arrays use VUE-designed compression drivers with a Truextent® beryllium diaphragm in the center. Beryllium surpasses both aluminum and titanium thanks to an extremely high stiffness / mass ratio, which drastically reduces mechanical deformation (rupture) and shifts the resonance frequencies outside the audible range.
The net result is a more defined HF at much higher SPL than more conventional materials.
- CST™ (Continuous Source Topology)
- Berillio Truextent®
- SystemVUE Network Monitoring & Control
- Vue Point
Per saperne di più sugli ultimi sviluppi della tecnologia line array?
Scarica il file ACOUSTIC LINEARITY.
- LF sine wave 2500 W x 2 – MF sine wave 800 W x 2 – HF sine wave 800 W x 2
- 64-bit digital processing with EQ, time alignment, crossover management and speaker protection
- Ultra-premium converters offer 118 dB of dynamic range
- Entry delay up to 2 seconds per channel
- LCD display for easy user interface (non-LCD version available for fixed installation)
- Compatible with SystemVUE control and monitoring software for Mac or PC
- Maximum input level of +23 dBu for the most demanding applications
- Latency <1 ms (typical 640 microseconds)
- Compact 2U rack mount chassis
The 2U-sized V6 Systems Engine is a 2 in / 6-out configuration that provides six amplifier channels more than enough for four al-8 tri-amp elements.
Inside each V6 chassis are six dedicated amplifiers that provide two channels at 2500W each for the low frequency, four channels at 800W each for the mid-frequency and high-frequency sections.
In addition to amplification, the V6 Systems Engine also handles all system processing and management functions, including speaker protection and system-optimized alignment of EQ, tempo and crossover functions. Rear panel signal connections include two XLR and AES / EBU inputs, with a pair of NL8 connectors for speaker outputs.
Finally, V6 Systems Engine offers full networking capabilities through SystemVUE software for Mac and PC, as well as full compatibility with VUEPoint power steering technology. Learn more about VUEDrive ™ system engines.